Washers are heavy-duty household appliances. However, it is common to experience some problems while using it from time to time. One common problem you may encounter is sometimes the water level in washer is low.
There are solutions you can apply by yourself at home if the cause is simple. Otherwise, you need to call a repair service. Avoid the hassle of piled up laundry by making sure your washer is in good working order.
ExperienceLicensed technicians with over 25 years of experience
WarrantyFull warranty
ExcellenceWe offer 100% Satisfaction GuaranteedThe next time the water level in washer is low, donât worry just yet. Here are some reasons for the problem along with the possible solutions you can apply.
HE washers typically use a lot less water. If you recently made a switch to a HE washer, donât be surprised. These units reduce water consumption by up to 40%.
Your experience will be the same when you switch to a front loader washer. These also use low water levels. Thereâs no cause for worry. Enjoy the reduced water consumption courtesy of your new HE or front load washer.
Water pressure levels may fluctuate from time to time. When the pressure drops, it may take a while before your washer fills up with water.
Maybe you have recently turned off your main water supply for some pipe works. Check your pressure valve and adjust the pressure if you switched it back too low.
Your washer comes with a fill sensor that sets the water levels. A faulty sensor may prematurely shut off the water supply. Other times, it may not even fill your washer with any water.
A defective sensor needs replacement. Contact support for assistance in this case.
Your washer is the one appliance that you simply cannot do without. So, when you need fast repairs, call Express Repair GTA at (647) 492-7773. Here are a few reasons why you should call us:
