


Don’t see your issue? Just call — we’ve likely fixed it before.
A clogged burner, a faulty igniter, or a failed spark module is the usual cause. We clean or replace the part so the burner lights reliably.
Constant clicking usually comes from moisture, food residue, or a faulty switch. We find the cause and fix it.
A coil or radiant element that stays cold may have failed or lost contact with its switch. We test it and replace it if needed.
A failed bake element, igniter, or temperature sensor is the usual cause. We test the heating system and replace the faulty part.
An oven that runs too hot or too cold often needs a new sensor or thermostat. We test and replace the faulty part.
Stuck knobs, switches, and cracked glass affect safe use. We repair or replace the damaged part.
An error code points to a specific fault, such as a sensor, control board, or door switch. We read the code, inspect the part, and make the repair.
| Type of repair | Estimated labor |
|---|---|
| Bake element (electric — no bottom heat) | $179–249 |
| Broil element (electric — no top heat) | $179–249 |
| Surface burner coil element (electric) | $99–199 |
| Radiant surface element (glass top) | $179–249 |
| Infinite switch (burner control dial) | $99–199 |
| Main electronic control board / clock | $199–249 |
| Temperature sensor / RTD | $99–199 |
| Oven door glass replacement | $179–249 |
| Oven door hinges (door won’t close) | $199–249 |
| Door seal / heat gasket | $99–199 |
| Convection fan motor | $179–249 |
| Terminal block (burnt wiring at back) | $179–249 |
| Surface burner spark electrode | $179–249 |
| Indicator light / switch assembly | $99–199 |
| Drip bowls / receptacle block fix | $99–199 |
| Cooling fan motor | $179–249 |
Labor costs for stove and oven repairs may vary depending on the complexity of the built-in installation and the extent of component disassembly required. Prices are current as of May 19, 2026.
We stand behind our workmanship and qualifying repairs with our service warranty — up to 3 months on completed repair work.
Learn About Our Warranty




We repair nearly every major stove brand, from familiar household names to premium and less common models. With more than 25 years of appliance repair experience, we’ve worked on a wide range of stove designs and failure points. Our technicians bring that experience to every service call, so you can count on professional troubleshooting and a repair approach suited to your specific brand and model.
Admiral
AEG
Amana
Ariston
Asko
Avantgarde
Beaumark
Bertazzoni
Blomberg
BlueStar
Bosch
Brada
Broan
Cafe
Cove
Dacor
Danby
Electrolux
Fisher and Paykel
Frigidaire
Fulgor Milano
GE
Gaggenau
Haier
Hobart
Hotpoint
Inglis
Ikea
Jenn-Air
Kenmore
KitchenAid
LG
Liebherr
Magic Chef
Marvel
Maytag
Moffat
Monogram
Panasonic
Porter and Charles
Premier
Roper
Samsung
Sharp
Sirius
Smeg
Sub-Zero
Tappan
Thermador
Thor Kitchen
Venmar
Vent-A-Hood
Viking
Westinghouse
Whirlpool
White Westinghouse
Wolf
Woods
And more, including Miele appliances!

Need appliance repair? Contact us today and our local team will get back to you shortly.
Fill out the form and we’ll get back to you shortly with available times and a repair quote.
You can help extend the lifetime of your stove by doing the following:
Fat, grease and oils are flammable, and accidents do happen. Remember to keep things such as paper towels and other easily flammable objects away from your stove at all times.
Leaving your stove on is not something you want to do for obvious reasons. Nevertheless, if you do forget about a burner, this probably won’t cause a fire as they were designed to run indefinitely. The only thing to worry about is whether or not you left something on top because this will catch fire and become a hazard.
Stove repair duration heavily depends on whether or not spare parts are needed. If the repairman already has the spare parts, fixing the stove often takes less than a day. In the case that the spare part is not available at the moment, the repair may take longer.
On average, your stove should last you between 10 and 15 years. To avoid breakdowns and frequent stove repairs, try to maintain your stove as much as possible.
Since metal pads and highly abrasive cleaners are not recommendable because they can leave scratches on the surface of your stove, it might be hard for you to get rid of those stubborn stains. However, there are some good solutions you can choose from. For example, something as simple as boiling water or even some salt and baking soda mixed with water will work wonders. If simple methods like this don’t work, you can mix one-part white vinegar with two parts of water into a spray bottle and spray it directly on the surface.
Once your cooktop gets scratched, there is no way you can remove them. The only thing you can do is try to prevent them with proper care. For example, cast iron cookware is normally very rough and can leave scratches on your stove, so avoid using it. When you’re cleaning, do not use abrasive cleaning solutions or metal pads. They will do more damage than good.
When it comes to electric vs ceramic cooktops, they both have advantages and disadvantages. In terms of cleaning and maintenance, electric coil surfaces are very simple, whereas ceramic surfaces require specific cleaning methods. On the other hand, electric stoves can sometimes lose connectivity, which makes it harder for the burners to heat properly. This is a problem that ceramic coil stoves don’t normally have. Therefore, the choice between the two is a matter of personal taste.
When you can’t regulate the temperature of your stove, the most common cause is the infinite switch that controls the power supply to the burner. This type of stove repair requires a replacement part that one of our appliance repair technicians can easily get and install.
Some stove burners can be faulty and don’t heat up properly. In such cases, the burner needs replacement. On the other hand, the cause of the problem can also be a faulty switch or a bad connection to the burner socket. It’s best not to deal with these issues by yourself because only a certified stove repair technician can do it safely.
If you can’t turn on your stove, the problem may be as simple as it not being plugged into the wall socket. In some cases, your stove may be perfectly fine, but it’s the burner that’s faulty. Before you call for a repairman, make sure to check all burners and see if any of them are working. If this is not the case, one of our stove repair technicians will be able to determine the root cause of the problem.
While stoves are considered relatively simple appliances (compared to more complex devices), it’s not advisable to attempt repairs yourself. Apart from potentially making the problem worse, you could even end up paying more or worse, injuring yourself.
The cost of the repairs will depend on the problem. Of course, we always do everything in our power to keep repairs as economical as possible.
Yes, all stove repairs performed by our team are covered by our satisfaction guarantee.
During our first evaluation, we will make sure that we stock our van with all the necessary tools and various parts. Our aim is always to complete repairs within our first visit.
For speedy repairs, it’s important that you provide our team with all the relevant details regarding the problem and the make and model of the stove. If there’s anything you’re not sure of, we will be happy to assist you. Make sure that your oven is empty before we arrive and that there’s nothing in the way that will prevent our team from completing the job.
Book online and save $25, or call and talk to a technician now.