Express Appliance Repair provides:
ExperienceLicensed technicians with over 25 years of experience
WarrantyFull warranty
ExpertiseLicensed technicians unrivaled in experience and customer care
Over 100 years ago, Maytag began as a company mainly focused on producing washing machines. Due to their great success, over the years they expanded their range of products to include kitchen appliances such as refrigerators and dishwashers. If your Maytag refrigerator, stove, or any other appliance breaks down, professional repairs will help you get even more out of your appliances. For fast and reliable Maytag appliance repairs in the Greater Toronto Area, call Express Appliance Repair on (647) 492-7773. We are available 24/7, and our technicians offer same day service for your convenience. Our team arrives with tools and various parts in order to speed up the repair process.
When your Maytag fridge stops working, your dishwasher fails to clean all your dishes, or your washer starts to leak, it’s time to call professional repair technicians. Contact Express Appliance Repair for expert repair services in the Greater Toronto Area. Your satisfaction is our number one priority which is why we provide a 100% satisfaction guarantee on all repairs. Not only do we pride ourselves in performing quality repairs, but we also do so promptly and with your budget in mind. For same day Maytag appliance repairs by trained and experienced technicians, contact our helpful team. Since household appliances don’t necessarily break down during office hours, we are available 24/7.
Maytag produces a wide variety of refrigerators. From side by side to French door style fridges, it’s easy to find a suitable model to suit your kitchen. If you notice any problems with the way your refrigerator is performing, contact us. We are available 24/7 to perform same day Maytag fridge. We understand that the longer your fridge is broken, the greater the chance of all your food spoiling. Don’t delay, call us right away!
Some of the most common stove problems include temperature control issues. This means that your stove is either running too hot or not getting warm enough. No matter the fault, it’s best to address the issue promptly and avoid using your stove until repairs have been completed. For professional Maytag stove repairs, call Express Appliance Repair. We offer 24/7 service throughout Toronto, and we also offer same-day service for your convenience.
When your dishwasher leaks, does not turn on, or any other problem comes up, it can be extremely inconvenient and stressful. Don’t let a faulty dishwasher turn your day upside down. Call Express Appliance Repair for reliable Maytag dishwasher repairs covered by our 100% satisfaction guarantee. Our same day service means that you will have full use of your dishwasher again in no time! We are available 24/7 for your convenience.
Common washer problems include leaks, strange noises, and laundry that doesn’t come out quite as clean as it should. When your washer breaks down, it’s often at the most inconvenient times. This is why we offer 24/7 Maytag washer repairs throughout Toronto and surrounding areas. Our team comes prepared with parts and tools to diagnose and repair your washer on the spot so that you don’t need to deal with unnecessary delays.
Is your dryer running too hot or is it not getting warm enough? If you are experiencing one of these problems or any other issue with your dryer, professional repairs are essential. Given the important role your dryer has to play, we understand the need for fast repairs. This is why we are available 24/7 for same day Maytag dryer repairs anywhere in the Greater Toronto Area. All dryer repairs performed by our technicians are covered by a 100% satisfaction guarantee.
When you call our team for fast Maytag oven repairs, we prepare by stocking our van with the necessary tools and various parts that might be required to complete the job. Our goal is not only to perform speedy repairs, but also repairs that last and allow you to get much more use out of your oven. We also cover all oven repairs with our 100% satisfaction guarantee, and we provide services throughout the Greater Toronto Area.
Maytag appliance repairs are best performed by trained technicians. At Express Appliance Repair, our team is both qualified and experienced in diagnosing problems and repairing appliances fast. While providing speedy, same-day service throughout the GTA, we also give each of our clients peace of mind with our 100% satisfaction guarantee.
Usually failure codes are caused by a faulty timer (aka ERC – the Electronic Range Control). Sometimes, even when the failure code implies that another component has failed, this can actually be a timer problem (whereby the timer is not displaying the correct fault code). If you are not sure whether the code you are seeing is due to a problem with the timer please call us, or send us an email, since we can help you determine whether the failure code is likely a timer problem or a problem with some other component. We can repair most timers so if you are sure your problem pertains to the timer (or ERC) please fill out a repair service request or call us (647) 492-7773.
| Failure Code | Fault Code Description | Solution |
| F0 | Function key stuck | Replace touch pad or if touch pad is part of the clock, replace the clock (ERC). |
| F1 | Defective touch pad or clock (ERC) | Replace touch pad or clock (ERC). Touch pad is a more common problem. Refer to F1 test at the top of this page for more information. |
| F2 | Oven temperature too hot | Replace relay board, if present, or oven temperature sensor (RTD). Check sensor harness. |
| F3 or F4 |
Shorted or open oven temperature sensor (RTD) | Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor (RTD) if wiring is ok. |
| F5 | Watchdog and hardware conflict | Replace clock (ERC). |
| F7 | Function key shorted or stuck | Replace touch pad or if touch pad is part of the clock, replace the clock (ERC). |
| F8 | Analog / Digital problem | Replace clock (ERC). |
| F9 | Door latch | Check door latch components. |
Disclaimer: please make sure to unplug your appliance if you feel that it is malfunctioning. Consult with an Express Repair professional to prevent any further damage to your appliance.
These error code explanations can help you diagnose a problem with your Maytag HE dishwasher.
| Error Code | Condition | Check/Repair |
| 1-1 | The electronic control board detects a stuck relay on its circuit board | Shut off power to the dishwasher for 5 minutes. If the code resumes when you restore power, have a service technician check the wiring and components. If the wiring and components are in working order, replace the electronic control board. |
| 1-2 | All the LED’s are on because the user interface control is incompatible with the electronic control board | The code appears when you install the wrong user interface control. Order and install the correct user interface control for your model of dishwasher. |
| 2-1 | The electronic control board detected a stuck key on the control panel. | See if any keys work. If no keys work or the control panel is damaged, replace the electronic control panel. If the control panel works, the problem might be with the electronic control board. |
| 2-2 | User interface control can’t communicate with electronic control board | Shut off power to the dishwasher. Check the wiring between the user interface control and the electronic control board. If the wires and connections are okay, replace the user interface control board. If the problem persists, replace the electronic control board. |
| 3-1 | Either there’s a break in the wiring or the thermistor/OWI component failed. (The thermistor is the water temperature sensor, the OWI is the Optical Water Indicator that detects the amount of debris in the water.) | Shut off power to the dishwasher and then check the wiring for the thermistor/OWI circuit. If the circuit wiring is undamaged, replace the thermistor/OWI component. |
| 3-2 | The thermistor/OWI circuit is electrically shorted, (The thermistor is the water temperature sensor, the OWI is the Optical Water Indicator that detects the amount of debris in the water.) | Shut off power to the dishwasher and then check the wiring for the thermistor/OWI circuit. If the circuit wiring is undamaged, replace the thermistor/OWI component. |
| 3-3 | OWI fails (the OWI is the Optical Water Indicator that detects the amount of debris in the water) | Shut off power to the dishwasher and clean the OWI. If the code resumes when you restore power, replace the OWI |
| 4-3 | No communication between the electronic control board and the wash pump motor | Shut off power to the dishwasher and check the wiring from the control board to the wash pump motor. If the wiring is okay, replace the wash pump. If the problem persists, replace the electronic control board. |
| 5-1 | Door won’t latch shut | Press the Start button and immediately close the door. If the code continues, shut off power to the dishwasher and check the door latch mechanism and the wiring attached to the door switch. If the latch mechanism and the wiring are intact, replace the door switch. |
| 5-2 | Door won’t open | Check the wiring in the door switch. If the wiring is undamaged, replace the door switch. |
| 6-1 | The electronic control board doesn’t detect water entering the dishwasher tub. | Shut off power and then water to the dishwasher. Check the water supply for proper flow and pressure. Check the wiring to the water inlet valve. If the wiring and the water supply are in working order, replace the water inlet valve. |
| 6-2 | Water inlet valve has an electrical problem. | Shut off power and then water to the dishwasher. Check the water supply for proper flow and pressure. Check the wiring to the water inlet valve. If the wiring and the water supply are in working order, replace the water inlet valve. If the problem continues, replace the electronic control board. |
| 6-3 | Suds or air are in the water pump | Check the water fill level and check for suds in the fill water at the bottom of the tub. if the fill level is too low, replace the water inlet valve. If there’s excessive sudsing, check the detergent dispenser and replace if it’s damaged |
| 6-4 | The float switch is open | Check the overfill float switch to see if it’s stuck or if an item is stuck under it. Check if the inlet water fill valve is properly shutting off the water supply when the dishwasher is off. |
| 6-6 | Incoming water is too cold | Use an accurate thermometer to check the water temperature. If it’s lower than 110 degrees F, check your water heater. water heater. If the water temperature is normal (110 to 120 degrees F), replace the thermistor/OWI or the electronic control board. Refer to the tech sheet for your dishwasher for a diagnostic test for the thermistor. |
| 6-7 | Disconnected or damaged flow meter | Shut off power to the dishwasher. Check the wiring to the flow meter. If the wiring is intact, replace the flow meter. |
| 6-8 | Water softener regeneration valve electrical problem (Water Softener Models Only) | Shut off power to the dishwasher. Check the wiring for the regeneration valve. Reconnect any loose wires. Replace the wire harness if damaged. Replace the regeneration valve if the wiring is okay. If the problem persists, replace the electronic control board. |
| 7-1 | Heating element doesn’t work | Shut off power to the dishwasher. Inspect the heating element and replace it if it’s visibly damaged. If not, check the wiring to the heating element. If the wiring is intact, replace the heating element. |
| 7-2 | Heating element won’t shut off | Shut off power to the dishwasher for 5 minutes. If the code resumes when you restore power, replace the electronic control board. |
| 8-1 | Slow drain | Shut off power to the dishwasher and then shut off water. Check the drain path for an obstruction. If the drain path is clear, check the wiring on the drain pump. If the wiring is intact, replace the drain pump. |
| 8-2 | Drain pump electrical problem | Shut off power to the dishwasher and then shut off water. Check the wiring on the drain pump. If the wiring is intact, replace the drain pump. |
| 8-3 | Drain pump stuck on | Shut off power to the dishwasher and check the drain pump wiring. Replace the wire harness if damaged. If the wiring is okay, replace the electronic control board. |
| 10-1 | Dispenser electrical problem | Shut off power to the dishwasher. Remove the outer door panel and check the wiring in the detergent dispenser circuit. If the wiring is intact, replace the detergent dispenser. |
| 10-3 | Drying fan problem | Shut off power to the dishwasher. Check the wiring in the drying fan circuit. If the wiring is intact, replace the drying fan. |
