Is your appliance not working? Don’t worry! Our specialized Magic Chef appliance repair services in Toronto and the GTA make the repair process easy.
Don't see your issue? Just call — we've likely fixed it before.
Magic Chef has been a familiar name in North American kitchens and laundry rooms for decades, and many of these appliances are still running well past their first ten years. Age is usually what causes trouble: worn belts, tired heating elements and sticky controls.
We repair the full Magic Chef range, from fridges and stoves to dishwashers, washers and dryers. Because some models are older, our technicians carry common parts and can often source the rest quickly.
Magic Chef fridges, from compact units to full-size models, can lose cooling because of a worn start relay, a failed fan or a blocked defrost drain. We find the cause and fix it, usually on the first visit.
Common fridge problems:
We repair Magic Chef gas and electric stoves with weak igniters, burners that will not light or heat evenly, and failing oven thermostats.
Common stove problems:
If your Magic Chef dishwasher leaves water behind or the dishes come out dirty, the problem is often a clogged filter, a worn pump or a faulty inlet valve. We trace it and repair it.
Common dishwasher problems:
Magic Chef washers that shake, leak or stop mid-cycle usually need a new drain pump, belt or lid switch. We repair top-load and compact models.
Common washer problems:
A Magic Chef dryer that runs but does not heat typically has a burned heating element or a tripped thermal fuse. We replace the failed part and check the vent as well.
Common dryer problems:
We repair Magic Chef ovens that heat unevenly, run too hot or cold, or stop baking, replacing elements, sensors and thermostats as needed.
Common oven problems:
We stand behind our workmanship and qualifying repairs with our service warranty — up to 3 months on completed repair work.
Learn About Our Warranty
Need appliance repair? Contact us today and our local team will get back to you shortly.
Fill out the form and we’ll get back to you shortly with available times and a repair quote.
| Failure Code # | Fault Code Description | Solution fro fault code |
| F0 | The machine’s function key is stuck | You will have to replace the touchpad on the unit. If the touchpad is part of the unit’s clock, then you will have to replace the clock (ERC). |
| F1 | The touchpad or the clock(ERC) is not working | You will have to get the touchpad or clock(ERC) replaced. Usually, the issue is with the touchpad. |
| F2 | The temperature in the oven gets too hot | You should replace the relay board. If it is present in the machine, you can replace the oven temperature sensor(RTD). You will also have to check the harness for the sensor. |
| F3 or F4 |
Sensor for oven temperature is open or has shorted | You should inspect the harnesses for the sensor and connection, particularly between the oven sensor and control. If the wiring is ok, then you should replace the oven temperature sensor(RTD). |
| F5 | The issue between watchdog and hardware | You will have to replace the machine’s clock (ERC). |
| F7 | The machine’s function key has shorted or is stuck stuck | You will have to replace the touchpad on the unit. If the touchpad is part of the unit’s clock, then you will have to replace the clock (ERC). |
| F8 | An issue with analog/digital | You will have to replace the machine’s clock (ERC). |
| F9 | A problem with the door latch | You will have to inspect the parts for the door latch. |
Disclaimer: please make sure to unplug your appliance if you feel that it is malfunctioning. Consult with an Express Repair professional to prevent any further damage to your appliance.
Book online and save $25, or call and talk to a technician now.
Request Service
(647) 492-7773
