2307, 2025
Samsung Dishwasher Error Codes E06/ E28/ E45 – Leakage Error

Samsung Dishwasher Error Codes E06/ E28/ E45 – Leakage Error

Samsung Dishwasher Error Codes E06/ E28/ E45

If you’ve landed on this page, chances are your Samsung dishwasher just flashed an E06, E28, or E45 error code—and you’re staring at it, wondering what on earth to do next.

Don’t worry, you’re not alone. These codes all point to a leakage error, and while it’s not the best news, it doesn’t mean your dishwasher is beyond saving.

Let’s walk through what these codes mean, what you can try at home, and when it’s time to call in a local expert for a same-day, fast repair.

What Do E06, E28, and E45 Mean?

Error Codes E06/ E28/ E45

In Samsung dishwashers, E06, E28, and E45 all relate to water leakage somewhere inside the appliance.

Usually, the machine’s sensors have detected water in places it shouldn’t be—think under the tub, near the base, or around the door seal.

Sometimes it’s a simple fix, other times it can signal a more serious issue with hoses, seals, or even the control board.

Quick DIY Fixes for Samsung Dishwasher Leakage Errors

Common Causes of Dishwasher Leakage

Before you reach for the phone, here are a few things you can safely check and try:

  1. Check the Door Seal:

    Open the dishwasher and carefully inspect the rubber seal around the door. If you spot any food debris or buildup, give it a gentle wipe with a damp cloth. Sometimes, a bad seal can trigger leakage errors.

  2. Inspect the Hoses:

    Pull the dishwasher out (if you’re comfortable doing so) and look at the water inlet and drain hoses for any kinks, loose connections, or obvious leaks. Tightening a clamp or replacing a cracked hose could solve the problem.

  3. Clean the Filter:

    A clogged filter can cause water to pool inside the machine. Remove the bottom rack, unscrew the filter cover, and clean out any trapped debris or gunk.

  4. Check for Blockages:

    Make sure there are no plates or utensils sticking out and blocking the door from closing completely. It sounds simple, but it’s a common cause!

  5. Power Cycle:

    Turn off the dishwasher at the breaker for a few minutes, then turn it back on. Occasionally, a quick reset is all you need to clear an error code.

When to Call a Local Express Repair Service

If you’ve tried these steps and the error code won’t go away—or if you notice puddles of water under your dishwasher—it’s probably time to call in the pros.

Water leaks can get worse quickly, sometimes leading to kitchen damage or electrical hazards. That’s where a fast, emergency repair makes all the difference.

Our local team offers same-day service, and we know these Samsung error codes inside and out.

Plus, when you book online, you’ll get $25 off your repair and a free service call with repair—so you only pay if we actually fix the issue.

If you’re searching for “Samsung dishwasher repair near me,” you’re in the right place.

Final Thoughts

While some leakage errors have quick fixes, it’s not worth risking a bigger problem or a flooded kitchen.

Tackle the basics, but don’t hesitate to reach out to a local express repair technician if things still aren’t working.

Remember, getting professional help today can save you money and headaches down the road.

Need help right now? Book online and get $25 off your repair.

We’re here for your emergency dishwasher repairs, fast and friendly—so you can get back to enjoying your kitchen, stress-free.

Why Choose Us?

We’ve helped countless homeowners across the city with Samsung dishwasher repairs, from small leaks to full system replacements. Our local team understands the urgency and delivers results fast, especially during kitchen emergencies.

Whether you found us by searching for dishwasher repair near me or were referred by a neighbor, rest assured you’re in capable hands.

(647) 492-7773
Available 7 am – 10 pm including weekends and holidays