Kenmore Appliance Repair Niagara Falls

At Express Appliance Repair Niagara Falls, our technicians are highly experienced with Kenmore appliances and can carry out successful repairs for all makes and models. At Kenmore, we ensure every project is treated with the utmost care. We offer high-quality service to go along with our efficient work pace. Your lives become that much easier when you choose Kenmore appliance repair.

Why Choose Us?

  • Same Day Or Next Day Service In Niagara Falls
  • Repair Any Make/Model
  • Available 7 Days A Week
Book Online & Save $25
Kenmore Appliance Repair Services

The North American brand Kenmore makes a plethora of household appliances. Established in 1913, the company is credited with manufacturing one of the first washing machines. From 1927 to date, Kenmore has been one of the leading brands of washing machines.

Sears Holdings is the owner of Kenmore through its subsidiary KCD IP, LLC. The Chicago-based company has licensed the rights to use its brand name to multiple companies. Kenmore appliances are produced by Whirlpool Corporation and Electrolux, Daewoo Electronics, LG Corporation, Cleva North America, and Panasonic. The bestselling appliances of the brand right now include a fridge, dishwasher, washer and dryer, stove, and ovens. Kenmore is also known for its stainless steel cleaner, vacuums, barbecue grills, air purifiers, water softeners, air conditioners, fans, gas furnaces, heaters humidifiers, dehumidifiers, heat pumps, water heaters, toasters, coffee makers, and water filters.

Appliance Repair Kenmore

No Stress
Call Express

Available 7 am – 10 pm
Including Weekends and Holidays

Kenmore Appliance Repair

Kenmore pioneered various technologies that are relevant even today. As is the case with most pioneering brands, especially in the segment of household appliances, the company has had to deal with various problems over the years. Kenmore continues to be a popular brand and its products are reliable but there have been cases of defective appliances. Kenmore appliances have been routinely plagued with malfunctions, installation problems, faulty components or parts and even some of the new models have been subpar.

Express Appliance Repair Niagara Falls offers timely Kenmore appliance repair in Niagara Falls. We can provide you with same-day service, next-day service, and emergency service. You may also schedule our service at a convenient date and time. Our repairs are affordable, reliable, and holistic. Our technicians are available throughout the year, including holidays and weekends. We can perform Kenmore appliance repair at any time from 8 am to 9 pm, and we cover Niagara Falls and the surrounding areas.

Call us at (289) 554-0768 for same-day or next-day Kenmore appliance repair. No matter the problem or the brand of your appliance, you can always depend on Express Appliance Repair.

Kenmore on brand pages on brand pages refrigerators are available in all shapes and sizes. The model you choose obviously depends on your needs, your household size, and your budget. No matter the model, when you need professional repairs, our team will be right over to solve any problem.

Our technicians will arrive with all the tools and various parts that might be needed to complete repairs during our first visit. Our goal is to complete all Kenmore on brand pages fridge repairs within a single visit.

Kenmore Fridge Repair

Stove Repair Kenmore

Cooking on an Kenmore stove is an absolute dream! Such practical appliances can often prove to be eyesores in a kitchen, but Kenmore has taken the time to invest plenty of time and energy into the design process.

When your Kenmore stove requires repairs, call our technicians for speedy service. Not only do we perform fast repairs, but we also understand the value of each appliance, and we work carefully not to cause any unnecessary damage.

You’ve got to love the convenience of loading up your Kenmore dishwasher, pressing a few buttons and letting it get to work while you enjoy doing something else. Life without it would mean spending extended periods of time hunched over the kitchen sink!

If you need Kenmore dishwasher repairs, remember to always call professionals for quick and reliable service. All Kenmore dishwasher repairs by Express Appliance Repair are backed by our 100% satisfaction guarantee.

Dishwasher Repair Kenmore

Washer Repair Kenmore

You might not use your Kenmore washer every day but, when you do, it’s surely one of the most valued appliances in your home! If your washer fails to turn on or you notice any other problem, it’s best to hold off on doing laundry and call our team for a professional diagnosis and repair.

Our fast, same day Kenmore washer repairs ensure that your washer is up and running fast so that you don’t need to worry about hand washing or rushing off to the laundromat.

Once your washer has done its part, it’s up to your dryer to get all that laundry perfectly dry and ready for the closet. Dryers can experience problems from time to time, but these faults are quickly resolved by our experienced technicians at Express Appliance Repair.

If your Kenmore dryer is running too hot, not getting warm enough, or if you notice any other problem, call us right away. We are available 24/7 for all Kenmore dryer repairs.

Dryer Repair Kenmore

Oven Repair Kenmore

Whether you enjoy making regular oven-cooked meals or you love to bake, your Kenmore oven will make it an even greater pleasure. Of course, if your oven is not performing as it should, it’s important to have a professional diagnose the problem right away. Do not attempt to cook in an oven that’s not working as it is supposed to.

Call us for same day Kenmore oven repairs. We come prepared with all the tools and various parts in order to perform repairs on the spot.

Kenmore Appliance Repair Cost in Niagara Falls

✓ Service Areas Niagara Falls, ON
✓ Kenmore Washer Repair Cost $-$$
✓ Kenmore Fridge Repair Cost $-$$
✓ Kenmore Oven Repair Cost $-$$
✓ Kenmore Stove Repair Cost $-$$
✓ Kenmore Dishwasher Repair Cost $-$$
✓ Kenmore Dryer Repair Cost $-$$

Common Kenmore Error Codes

Dishwasher Error Codes
Failure Code # Description of Fault Code Solution for Fault Code
Clean light blinks 7 times Heater circuit failure. Control didn’t detect the expected rise in water temperature when the heating element was energized to heat water during the cycle. Check the heating element and related components (wiring and control board) in that circuit
Console light blinks rapidly The control detects a stuck button on the control panel. A failed control panel or a bad electronic control board can cause this code. Check the buttons on the control panel using a volt/ohm meter. In most cases, the control panel needs to be replaced.
Start/Resume light blinks slowly If the dishwasher door is opened or power is interrupted during the cycle, the dishwasher won’t start again until the door is detected as closed and the Start/Resume button is pressed. Check the door latch and switch assembly. A failure in the Start/Resume button also can cause this problem.
Clean light stays on The dishwasher won’t start a new cycle unless it detects that the door opened after the previous cycle. Turn off power to the dishwasher by shutting off the breaker and restarting. If that does not work, the door switch assembly is stuck and must be replaced.
Control lock LED is on but not accepting key presses Accidentally turned on or control detected keypad problem. Press the Heated Dry key for 5 seconds to turn off control lock feature. If that doesn’t work, replace keypad.
Sanitized LED blinks at end of cycle Control could not confirm Sanitation achieved. Check voltage to the dishwasher and the temperature of incoming water. Check the diverter motor, the heater and the OWI/thermistor

Disclaimer: please make sure to unplug your appliance if you feel that it is malfunctioning. Consult with an Express Repair professional to prevent any further damage to your appliance.

Dishwasher Error Codes for HE Models
Failure Code # Description of Fault Code Solution for Fault Code
1-1 The electronic control board detects a stuck relay on its circuit board. Shut off power to the dishwasher for 5 minutes. If the code resumes when you restore power, have a service technician check the wiring and components. If the wiring and components are in working order, replace the electronic control board.
1-2 Damaged or corrupted memory on control board. Incompatible software components inside microprocessor. Shut off power to the dishwasher for 5 minutes. If the code resumes when you restore power, replace the electronic control board.
2-1 The electronic control board detected a stuck key on the control panel. See if any keys work. If no keys work or the control panel is damaged, replace the electronic control panel. If the control panel works, the problem might be with the electronic control board.
2-2 The electronic control board detects no communication from the control panel. See if any keys work. If no keys work or the control panel is damaged, replace the electronic control panel. If the control panel works, the problem might be with the electronic control board.
3-1 Either there’s a break in the wiring or the thermistor/OWI component failed. (The thermistor is the water temperature sensor, the OWI is the Optical Water Indicator that detects the amount of debris in the water.) Shut off power to the dishwasher and then check the wiring for the thermistor/OWI circuit. If the circuit wiring is undamaged, replace the thermistor/OWI component.
3-2 The thermistor/OWI circuit is electrically shorted, (The thermistor is the water temperature sensor, the OWI is the Optical Water Indicator that detects the amount of debris in the water.) Shut off power to the dishwasher and then check the wiring for the thermistor/OWI circuit. If the circuit wiring is undamaged, replace the thermistor/OWI component.
3-3 OWI fails (the OWI is the Optical Water Indicator that detects the amount of debris in the water) Shut off power to the dishwasher and clean the OWI. If the code resumes when you restore power, replace the OWI
4-1 No communication between the electornic control board and the wash pump motor Shut off power to the dishwasher and then check the wiring from the control board to the wash pump motor. If the wiring is undamaged, replace the wash pump. If the problem persists, replace the electronic control board.
4-2 Communication error between the electronic control board and the wash pump motor Shut off power to the dishwasher and then check the wiring from the control board to the wash pump motor. If the wiring is undamaged, replace the wash pump. If the problem persists, replace the electronic control board.
5-1 Door won’t latch shut Press the Start button and immediately close the door. If the code continues, shut off power to the dishwasher and check the door latch mechanism and the wiring attached to the door switch. If the latch mechanism and the wiring are intact, replace the door switch.
5-2 Door won’t open Check the wiring in the door switch. If the wiring is undamaged, replace the door switch.
6-1 The electronic control board doesn’t detect water entering the dishwasher tub. Shut off power and then water to the dishwasher. Check the water supply for proper flow and pressure. Check the wiring to the water inlet valve. If the wiring and the water supply are in working order, replace the water inlet valve.
6-2 Water inlet valve has an electrical problem. Shut off power and then water to the dishwasher. Check the water supply for proper flow and pressure. Check the wiring to the water inlet valve. If the wiring and the water supply are in working order, replace the water inlet valve. If the problem continues, replace the electronic control board.
6-3 Suds or air are in the water pump Check the water fill level and check for suds in the fill water at the bottom of the tub. if the fill level is too low, replace the water inlet valve. If there’s excessive sudsing, check the detergent dispenser and replace if it’s damaged

6-4 The float switch is open Check the overfill float switch to see if it’s stuck or if an item is stuck under it. Check if the inlet water fill valve is properly shutting off the water supply when the dishwasher is off.

6-6 Incoming water is too cold Use an accurate thermometer to check the water temperature. If it’s lower than 110 degrees F, check your water heater. If the water temperature is normal (110 to 120 degrees F), replace the thermistor/OWI or the electronic control board. Refer to the tech sheet for your dishwasher for a diagnostic test for the thermistor.
6-7 Disconnected or damaged flow meter Shut off power to the dishwasher. Check the wiring to the flow meter. If the wiring is intact, replace the flow meter.
6-8 Problem with water softener regeneration valve Shut off power to the dishwasher. Check the wiring to the water softener regeneration valve. If the wiring is intact, replace the water softener regeneration valve.
7-1 Heating element doesn’t work Shut off power to the dishwasher. Inspect the heating element and replace it if it’s visibly damaged. If not, check the wiring to the heating element. If the wiring is intact, replace the heating element.
7-2 Heating element won’t shut off Shut off power to the dishwasher for 5 minutes. If the code resumes when you restore power, replace the electronic control board.
8-1 Slow drain Shut off power to the dishwasher and then shut off water. Check the drain path for an obstruction. If the drain path is clear, check the wiring on the drain pump. If the wiring is intact, replace the drain pump.
8-2 Drain pump electrical problem Shut off power to the dishwasher and then shut off water. Check the wiring on the drain pump. If the wiring is intact, replace the drain pump.
9-1 Electronic control board can’t detect the position of the diverter The diverter directs the water through the lower spray arm or the upper spray arm. Turn off power to the dishwasher and then check the wiring going to the diverter motor. If the wiring is intact, replace the diverter.
9-2 Diverter is stuck on Remove the lower dishrack and the lower spray arm. Disassemble the sump. Check the diverter disk and replace if visibly damaged.
10-1 Dispenser electrical problem Shut off power to the dishwasher. Remove the outer door panel and check the wiring in the detergent dispenser circuit. If the wiring is intact, replace the detergent dispenser.
10-2 Vent wax motor electrical problem Shut off power to the dishwasher. Check the wiring in the vent wax motor circuit. If the wiring is intact, replace the vent wax motor.
10-3 Drying fan problem Shut off power to the dishwasher. Check the wiring in the drying fan circuit. If the wiring is intact, replace the drying fan.

Your Trusted Local Appliance Technicians

We have built a team here that lives up to our 100% customer experience standards. We understand that you require a technician who is flexible and can work around your schedule, which is why we provide services 7 days a week, 365 days a year.

While quality and speed are top concerns, so is affordability. That is why we work hard to provide very competitive prices in the Niagara Falls region.