CLICK to CALL

Roper Appliance Repairs In Kitchener & Waterloo Area

DO YOU OWN AN ROPER APPLIANCE?

Express Appliance Repair Kitchener & Waterloo fixes:

  • Roper Stoves
  • Roper Dryers
  • Roper Washers
  • Roper Ovens
Available 7 am – 10 pm
including weekends and holidays
appliances we repair
appliance repair experienceExperienceLicensed technicians with over 25 years of experience
full appliances warrantyWarrantyFull warranty on all services and parts
appliance repair expertsExpertiseLicensed technicians unrivaled in experience and customer care

Roper appliance repairs

Household appliances are designed with the purpose of making life easier. The less time you spend doing chores, the more time you have to do the things you enjoy. Roper appliances are known for being extremely easy to use, and they are practical solutions for many households all around Kitchener & Waterloo Area. Like any other brand, it’s important to understand that repairs will be necessary from time to time. When you need Roper appliance repairs, our team will not only arrive that same day, but we also offer a 100% satisfaction guarantee. While speedy service is a priority for our technicians, quality is equally important, and we always put your needs first. Call us on (519) 914-1159 for reliable Roper appliance repairs in your area.

Why Choose Express Appliance Repair Kitchener & Waterloo for Roper Appliances?

When any appliance breaks down, it can turn easy tasks into time-consuming chores. In some cases, such as stoves and ovens, immediate repairs are essential if you want to avoid the cost of ordering in or dining out night after night. This is why we offer from 8am to 9pm, 7 days a week same day Roper appliance repairs all around Kitchener & Waterloo Area. Another major concern is the quality of the repair work. At Express Appliance Repair Kitchener & Waterloo, we cover all of our work with a 100% satisfaction guarantee. When we are called out for any household appliance repair, we always arrive fully prepared with tools and various parts to perform repairs on the spot. With us, you get the convenience of speed as well as high-quality repairs performed by trained and experienced technicians.

roper stove repair

Roper is known for producing high-end stoves that make cooking a real pleasure. Of course, like any other stove, you might need Roper stove repairs at some point. Rather than paying high prices or waiting days for a technician, call Express Appliance Repair Kitchener & Waterloo. Our team is available from 8am to 9pm, 7 days a week, and we offer fast same day service all around Kitchener & Waterloo Area for your convenience. All stove repairs are covered by our 100% satisfaction guarantee.

roper washing machine repair

If your washer starts making a strange noise, springs a leak, or no longer turns on, it’s definitely time to call for speedy repairs. Given the importance of your washer, waiting for days to get it fixed can be extremely inconvenient. For professional, same day Roper washer repairs, call Express Appliance Repair Kitchener & Waterloo. Our technicians are trained and experienced in diagnosing any problem and performing speedy repairs. Your convenience and satisfaction are our top priority.

roper dryer repair

If your dryer is not working properly, it’s best to avoid using it until you’ve called a professional to perform repairs. Using a faulty dryer can not only damage your laundry, but you could even put yourself and your family at risk. Express Appliance Repair provides prompt Roper dryer repairs throughout Kitchener & Waterloo Area, and our team always comes prepared to perform repairs on the spot. Our priority is to get your dryer in perfect working order within our first visit.

roper oven repair

Roper ovens, like their stoves, are produced according to the highest of standards. Although they are known for their reliability, it’s not uncommon for some kind of repair or maintenance to become necessary after time. When you notice any problem with your oven, call Express Appliance Repair Kitchener & Waterloo. Our team is available from 8am to 9pm, 7 days a week for same day Roper oven repairs. Apart from our speedy service, we also cover our repairs with a 100% satisfaction guarantee to give you added peace of mind.

Fast Roper Appliance Repairs in Kitchener & Waterloo Area

The longer you have to wait for your appliance to be repaired, the more inconvenient it becomes. No matter the appliance or the problem, fast Roper appliance repairs are what makes our team stand out above the rest. When you need your oven, stove, or washer back in working order without delay, call Express Appliance Repair Kitchener & Waterloo.

For expert Roper appliance repair technicians,

contact Express Appliance Repair Kitchener & Waterloo on (519) 914-1159 today!

 


ROPER FAULT CODES

Usually failure codes are caused by a faulty timer (aka ERC – the Electronic Range Control). Sometimes, even when the failure code implies that another component has failed, this can actually be a timer problem (whereby the timer is not displaying the correct fault code). If you are not sure whether the code you are seeing is due to a problem with the timer please call us, or send us an email, since we can help you determine whether the failure code is likely a timer problem or a problem with some other component. We can repair most timers so if you are sure your problem pertains to the timer (or ERC) please fill out a repair service request or call us (519) 914-1159.

Failure Code Fault Code Description Solution
4 Digit Failure Codes (for 2 digit codes see below)
F1 – E0 EEPROM communication error 1. Disconnect power for at least 30 seconds.
2. Re-apply power and observe for at least one minute.
3. If code re-appears, replace control board (also called ERC or clock). Note: Applies to all F1-E… codes except F1-E3.
F1 – E1 EEPROM checksum error
F1 – E2 UL A/D error(s)
F1 – E4 Model ID error
F1 – E5 Calibration shifted
F1 – E6 Latch signal mismatch error
F1 – E9 Stack overflow
F1 – E3 Wiring harness cavity size does not match previously stored value The “Cavity Size Select” jumpers in the wiring harness indicate a cavity size different from that which the control was previously configured for. Check the jumpers in the harness to make sure they agree with the actual oven size.
F2 – E0 Shorted keypad (also called touch pad) 1. Check keypad connector for firm connection (keypad connects to control board).
2. Press CANCEL. If error code returns after 60 seconds, replace keypad (also called touch pad or membrane switch). Some models incorporate keypad in to control board as one unit. In this case, replace control board (also called ERC or clock).
F2 – E1 Keypad cable unplugged
F2 – E5 Cancel key drive line open
F2 – E6 Cancel key drive line open
F3 – E0 Oven temperature sensor (RTD) opened (upper oven, if double oven) Replace Oven temperature sensor (RTD)

Note: Applies to all F3-E… codes.

F3 – E1 Oven temperature sensor (RTD) shorted (upper oven, if double oven)
F3 – E2 Oven temperature is too high (Cook mode)
F3 – E3 Oven temperature is too high (Clean mode)
F3 – E4 Oven temperature sensor (RTD) opened (lower oven, if double oven)
F3 – E5 Oven temperature sensor (RTD) shorted (lower oven, if double oven)
F3 – E6 Warming drawer sensor open
F3 – E7 Warming drawer sensor shorted
F4 – E1 Meat probe malfunction – shorted Problem could be with the probe, the receptacle, or probe circuit. Check probe. Look for pinched wire. Look for condensation or contamination on probe receptacle. Replace probe if all else checks out ok.
F5 – E0 Door switches do not agree (condition exists when door switch is closed indicating an open door, and latch switch is closed indicating a locked door) 1. If door latched:
A. Disconnect power from unit.B. Check wires and connectors from control to door switch, then from door switch to control. If no damage to wires and all connectors okay, proceed to step C.C. Replace door switch.D. Re-apply power.E. Press and hold any key down for 1 minute to clear F5 failure code from memory. F2 will appear. Press CANCEL and observe for 1 minute to ensure operation is correct.2. If door not latched:A. Disconnect power from unit.B. Check wires and connectors from control to latch switch, then from latch switch to control. If no damage to wires and all connectors okay, proceed to step C.C. Repeat steps A and B for door switch.3. Measure door switch (door open = switch open small low voltage terminals). Replace switch if defective.
4. Measure latch switch (unlatch = switch open, CAUTION – oven light contacts are closed). Replace switch if defective.
5. If corrections are made in any step, reconnect power to control. Press and hold any key for 1 minute to clear R failure code from memory. F2 will appear. Press CANCEL and observe for 1 minute to ensure operation is correct.
6. If failure remains, disconnect power and replace control. Note: Applies to all F5-E… codes.
F5 – E1 Self clean latch will not lock
F5 – E2 Latch during CLEAN error
F5 – E5 Self clean temperature not reached within 45 minutes.
F5 – E6 Door is open, but latch is locked
F5 – E7 Self clean latch will not unlock
F6 – E0 Return line not connected If switch pulse return line is not connected, electronic control will display F6 within 60 seconds after power up. Replace control.
F7 – E1 Common switch wire is defective Common wire (+5VDC) to latch switch, and to door switch is shorted to chassis ground or neutral. A double oven will have two of each switch and one common wire.
1. Check connections at control and at the latch switch and door switch.
2. If all connections are good, then check the individual switches as outlined for the F5 failure.
2 Digit Failure Codes
F0 Board failure Replace control board (also called ERC or clock).
F1 Board failure Replace control board (also called ERC or clock).
F2 Oven temperature is too high 1. Look for welded relay contacts on bake or broil relays. If this happens, replace oven control (also called clock or ERC).
2. For SELF CLEAN models: check door lock operation.
3. Look for a high resistance connection or any other cause of high resistance in the oven temperature sensor circuit. Check sensor, sensor harness and sensor harness connection at sensor and oven control. Replace sensor if found defective. Remember: Oven control (ERC) measures resistance of sensor circuit, not actual oven temperature.
F3 Oven temperature sensor (RTD) open Replace Oven temperature sensor (RTD)
F4 Oven temperature sensor (RTD) shorted Replace Oven temperature sensor (RTD)
F5 Board failure Replace control board (also called ERC or clock).
F7 Function key stuck on ERC Replace control board (also called ERC or clock).
F8 Board failure Replace control board (also called ERC or clock).
F9 Oven door lock failure Check wiring to door lock switch (the wire harness may be connected wrong). Check for stuck lock switch.

 

    X

    GET $25 OFF ANY REPAIR

    Disclaimer: please make sure to unplug your appliance if you feel that it is malfunctioning. Consult with an Express Repair professional to prevent any further damage to your appliance.