Express Appliance Repair Hamilton fixes:
ExperienceLicensed technicians with over 25 years of experience
WarrantyFull warranty on all services and parts
ExpertiseLicensed technicians unrivaled in experience and customer care
What started as a manufacturer of small household appliances soon grew into one of the most respected names in the industry. Kenmore refrigerators, dishwashers, ovens, and other products have become increasingly popular and desireable over the years which has allowed the brand to continually expand and grow. Such high-quality appliances deserve the very best in terms of repairs and maintenance. At Express Appliance Repair Hamilton, our technicians are fully-trained and experienced in performing Kenmore appliance repairs. We are available 7 days a week and our same day service means that your appliance will be restored to working order before you know it! Don’t settle for anything less than the best. Contact our expert team on (289) 426-5751 for reliable Kenmore repairs.
When your Kenmore refrigerator, stove, or washer breaks down, you might frantically wonder who to call. Not all repair services are available 7 days a week, and they might not be able to tend to your repair needs that day. At Express Appliance Repair, we understand that appliances break down when you least expect, and at the most inconvenient times. Our 7 days a week same day service ensures that you’ll have your appliance back up and running sooner rather than later. Apart from our speedy service, we also cover all of our Kenmore appliance repairs with a 100% satisfaction guarantee. We believe in efficiency as well as making sure that every customer is completely happy with our work.
Your refrigerator is responsible for keeping food, both cooked and uncooked, fresher for longer. Of course, if your fridge is not cold enough or if the motor fails completely, your food will spoil sooner than it should. When you need fast Kenmore fridge repairs, call Express Appliance Repair Hamilton. We live up to our name by providing 7 days a week same day repair services all around Hamilton and we will have your fridge up and running before you know it!
Whether a single hot plate or your entire stove gives you trouble, it’s important to seek professional assistance sooner rathe than later. Not only could the fault prove dangerous but it will also make cooking difficult or impossible. Not to mention expensive if you plan on ordering in! For reliable, professional Kenmore stove repairs, contact our team of trained experts. All stove repairs are covered by our 100% satisfaction guarantee for your peace of mind.
Dishwashers take the backache out of doing dishes. Without one, however, your cutlery and crockery sure can pile up! If your dishwasher is leaking, making some kind of strange noise, or simply not performing quite as it should, contact us right away. We are available 7 days a week for all Kenmore dishwasher repairs, and our team will arrive prepared to perform repairs on the spot. Remember, we offer same day service all around Hamilton!
Imagine having to do laundry without your washer! Scary thought, isn’t it? Well, this is the kind of fear that many consumers feel when their washer starts leaking or does not turn on. No matter the fault, our team will be right over to diagnose the problem and perform speedy Kenmore washer repairs. Not only do we offer same day service but we also come prepared with tools and parts to complete repairs right away.
Whether your dryer is running too hot, not getting warm enough, or you notice any other problem, it’s time to call Express Appliance Repair. We offer same day Kenmore dryer repairs throughout Hamilton, and our team will come prepared to perform repairs on the spot. Our 100% satisfaction guarantee also ensures that you are not only provided with fast service but also quality repairs. Don’t settle for less; your Kenmore dryer deserves the best!
When your oven does not turn on, or you notice temperature control issues, it’s best to avoid using it until professional repairs have been completed. In order to avoid any delays, call us for same day Kenmore oven repairs in Hamilton. Our technicians are available 7 days a week, and we will diagnose and repair your oven on the spot so that you can get back to cooking that feast! No matter the problem or model, our oven repairs are all covered by our satisfaction guarantee.
Whenever you buy a new appliance, you want it to last forever. Sooner or later repairs will be necessary, but this does not mean that you should settle for less than the best. For professional Kenmore appliance repairs in your area, contact Express Appliance Repair Hamilton. We are available 7 days a week for your convenience.
These error code explanations can help you diagnose a problem with Kenmore dishwashers with a model number that begins with 665, which is the Voyager series.
| Error Code | Condition | Check/Repair |
| Clean light blinks 7 times | Heater circuit failure. Control didn’t detect the expected rise in water temperature when the heating element was energized to heat water during the cycle. | Check the heating element and related components (wiring and control board) in that circuit |
| Console light blinks rapidly | The control detects a stuck button on the control panel. | A failed control panel or a bad electronic control board can cause this code. Check the buttons on the control panel using a volt/ohm meter. In most cases, the control panel needs to be replaced. |
| Start/Resume light blinks slowly | If the dishwasher door is opened or power is interrupted during the cycle, the dishwasher won’t start again until the door is detected as closed and the Start/Resume button is pressed. | Check the door latch and switch assembly. A failure in the Start/Resume button also can cause this problem. |
| Clean light stays on | The dishwasher won’t start a new cycle unless it detects that the door opened after the previous cycle. | Turn off power to the dishwasher by shutting off the breaker and restarting. If that does not work, the door switch assembly is stuck and must be replaced. |
| Control lock LED is on but not accepting key presses | Accidentally turned on or control detected keypad problem. | Press the Heated Dry key for 5 seconds to turn off control lock feature. If that doesn’t work, replace keypad. |
| Sanitized LED blinks at end of cycle | Control could not confirm Sanitation achieved. | Check voltage to the dishwasher and the temperature of incoming water. Check the diverter motor, the heater and the OWI/thermistor |
Disclaimer: please make sure to unplug your appliance if you feel that it is malfunctioning. Consult with an Express Repair professional to prevent any further damage to your appliance.
These error code explanations can help you diagnose a problem with your Kenmore HE dishwasher.
| Error Code | Condition | Check/Repair |
| 1-1 | The electronic control board detects a stuck relay on its circuit board. | Shut off power to the dishwasher for 5 minutes. If the code resumes when you restore power, have a service technician check the wiring and components. If the wiring and components are in working order, replace the electronic control board. |
| 1-2 | Damaged or corrupted memory on control board. Incompatible software components inside microprocessor. | Shut off power to the dishwasher for 5 minutes. If the code resumes when you restore power, replace the electronic control board. |
| 2-1 | The electronic control board detected a stuck key on the control panel. | See if any keys work. If no keys work or the control panel is damaged, replace the electronic control panel. If the control panel works, the problem might be with the electronic control board. |
| 2-2 | The electronic control board detects no communication from the control panel. | See if any keys work. If no keys work or the control panel is damaged, replace the electronic control panel. If the control panel works, the problem might be with the electronic control board. |
| 3-1 | Either there’s a break in the wiring or the thermistor/OWI component failed. (The thermistor is the water temperature sensor, the OWI is the Optical Water Indicator that detects the amount of debris in the water.) | Shut off power to the dishwasher and then check the wiring for the thermistor/OWI circuit. If the circuit wiring is undamaged, replace the thermistor/OWI component. |
| 3-2 | The thermistor/OWI circuit is electrically shorted, (The thermistor is the water temperature sensor, the OWI is the Optical Water Indicator that detects the amount of debris in the water.) | Shut off power to the dishwasher and then check the wiring for the thermistor/OWI circuit. If the circuit wiring is undamaged, replace the thermistor/OWI component. |
| 3-3 | OWI fails (the OWI is the Optical Water Indicator that detects the amount of debris in the water) | Shut off power to the dishwasher and clean the OWI. If the code resumes when you restore power, replace the OWI |
| 4-1 | No communication between the electornic control board and the wash pump motor | Shut off power to the dishwasher and then check the wiring from the control board to the wash pump motor. If the wiring is undamaged, replace the wash pump. If the problem persists, replace the electronic control board. |
| 4-2 | Communication error between the electronic control board and the wash pump motor | Shut off power to the dishwasher and then check the wiring from the control board to the wash pump motor. If the wiring is undamaged, replace the wash pump. If the problem persists, replace the electronic control board. |
| 5-1 | Door won’t latch shut | Press the Start button and immediately close the door. If the code continues, shut off power to the dishwasher and check the door latch mechanism and the wiring attached to the door switch. If the latch mechanism and the wiring are intact, replace the door switch. |
| 5-2 | Door won’t open | Check the wiring in the door switch. If the wiring is undamaged, replace the door switch. |
| 6-1 | The electronic control board doesn’t detect water entering the dishwasher tub. | Shut off power and then water to the dishwasher. Check the water supply for proper flow and pressure. Check the wiring to the water inlet valve. If the wiring and the water supply are in working order, replace the water inlet valve. |
| 6-2 | Water inlet valve has an electrical problem. | Shut off power and then water to the dishwasher. Check the water supply for proper flow and pressure. Check the wiring to the water inlet valve. If the wiring and the water supply are in working order, replace the water inlet valve. If the problem continues, replace the electronic control board. |
| 6-3 | Suds or air are in the water pump | Check the water fill level and check for suds in the fill water at the bottom of the tub. if the fill level is too low, replace the water inlet valve. If there’s excessive sudsing, check the detergent dispenser and replace if it’s damaged |
| 6-4 | The float switch is open | Check the overfill float switch to see if it’s stuck or if an item is stuck under it. Check if the inlet water fill valve is properly shutting off the water supply when the dishwasher is off. |
| 6-6 | Incoming water is too cold | Use an accurate thermometer to check the water temperature. If it’s lower than 110 degrees F, check your water heater. If the water temperature is normal (110 to 120 degrees F), replace the thermistor/OWI or the electronic control board. Refer to the tech sheet for your dishwasher for a diagnostic test for the thermistor. |
| 6-7 | Disconnected or damaged flow meter | Shut off power to the dishwasher. Check the wiring to the flow meter. If the wiring is intact, replace the flow meter. |
| 6-8 | Problem with water softener regeneration valve | Shut off power to the dishwasher. Check the wiring to the water softener regeneration valve. If the wiring is intact, replace the water softener regeneration valve. |
| 7-1 | Heating element doesn’t work | Shut off power to the dishwasher. Inspect the heating element and replace it if it’s visibly damaged. If not, check the wiring to the heating element. If the wiring is intact, replace the heating element. |
| 7-2 | Heating element won’t shut off | Shut off power to the dishwasher for 5 minutes. If the code resumes when you restore power, replace the electronic control board. |
| 8-1 | Slow drain | Shut off power to the dishwasher and then shut off water. Check the drain path for an obstruction. If the drain path is clear, check the wiring on the drain pump. If the wiring is intact, replace the drain pump. |
| 8-2 | Drain pump electrical problem | Shut off power to the dishwasher and then shut off water. Check the wiring on the drain pump. If the wiring is intact, replace the drain pump. |
| 9-1 | Electronic control board can’t detect the position of the diverter | The diverter directs the water through the lower spray arm or the upper spray arm. Turn off power to the dishwasher and then check the wiring going to the diverter motor. If the wiring is intact, replace the diverter. |
| 9-2 | Diverter is stuck on | Remove the lower dishrack and the lower spray arm. Disassemble the sump. Check the diverter disk and replace if visibly damaged. |
| 10-1 | Dispenser electrical problem | Shut off power to the dishwasher. Remove the outer door panel and check the wiring in the detergent dispenser circuit. If the wiring is intact, replace the detergent dispenser. |
| 10-2 | Vent wax motor electrical problem | Shut off power to the dishwasher. Check the wiring in the vent wax motor circuit. If the wiring is intact, replace the vent wax motor. |
| 10-3 | Drying fan problem | Shut off power to the dishwasher. Check the wiring in the drying fan circuit. If the wiring is intact, replace the drying fan. |
